LSM 710 and LSM 780
NOTES ON DEVICE SAFETY
Systems
Power Requirements
Carl Zeiss
02/2010 M60-1-0025
e
7
The door interlock interface (Fig. 4/1) is covered
with a green plug to bypass a door interlock.
•
To use the interface remove the top of the
green plug and the bypass wire.
•
Then connect the wires of the door interlock at
the same position.
Two door interlocks can be connected.
The LSM 710 and LSM 780 systems are controlled
by a remote control. This remote control contains
the main switch for the system and the key switch
for the laser.
•
To start the system switch the main switch
(Fig. 5/
1
) to ON.
•
To activate the laser turn the key switch
(Fig. 5/
2
) to ON position.
Fig. 4
Door interlock interface (1) on the
back of the electronic rack (see
Fig. 2 and Fig. 3, top)
1
Main switch ON/OFF
2
Laser key switch
Fig. 5
Remote control of LSM 710,
LSM 780 systems
