LEFT TOOL AREA AND HARDWARE CONTROL TOOLS
LSM 710 and LSM 780
Carl Zeiss
Processing Tab
Systems
110 M60-1-0025
e
02/2010
5.3.4
Average
The
Average
processing function will calculate an
image that can be averaged in pixel and time.
•
Activate
Average
in the
Processing
tool.
The
Average
menu will appear (Fig. 110). The
Average
processing function will calculate an
average image.
•
To select an image, press the
Select
button and
click into the image in the container. This will be
your
Input
image.
•
Select how many pixels you want to bin in x-
direction, y-direction and time points by setting
the respective values in the
X Average Pixels
,
Y Average Pixels
,
Z Average Pixels
and
Time
Average Pixels
input boxes, which can be
opened by clicking on the arrows.
Note that
Z-Average Pixels
and
Time
Average Pixels
are only available for
Z-Stacks and time series. You can either
enter a value in, or use the sliders or
arrows of the input boxes. If a moving
average should be performed, the
respective
Moving Average
box must be
checked.
In this case consecutive averages comprising the
specified number of frames will be computed.
An average output image will be calculated
according to the settings and the result presented
in the
Preview
window.
The size of the resulting image in
X
,
Y
,
Z
and
T
can
be viewed in the
Size of result image
display.
If the
Apply
button is pressed, the averaged image
will be opened as a new image in the container.
Fig. 110
Average window
