LSM 710 and LSM 780
LEFT TOOL AREA AND HARDWARE CONTROL TOOLS
Systems Maintain
Tab
Carl
Zeiss
02/2010 M60-1-0025
e
147
5.4.2
Objectives
This function permits changed objectives to be
activated and the parfocality to be set without
having to exit the software. The function can be
called up in the
Maintain
panel in the
Objectives
tool of the
Maintain
tool group (see Fig. 160).
5.4.2.1
Change Objective
•
Change the required objective in the nosepiece.
•
Click on the
Objectives
tool in the
Maintain
tool group of the
Maintain
panel.
−
A list of available objectives is displayed with
position and name (Fig. 161).
•
Click on the graphical button of the relevant
nosepiece mount (
Position
).
−
An expansion (
Change Objective
) window
appears.
All available objectives are listed in the
Potential Objectives
,
User defined
Objectives
or
Favorite Objectives
directories of the expanded window (see
Fig. 162).
•
Select the new objective by highlighting it from
the appropriate
Objectives
directory. Press the
Set As New Objective
button to assign the
objective to the selected
Position
.
•
Click anywhere outside the expansion window
to close it.
Fig. 160
Maintain and Options tool groups
Fig. 161
Objectives tool
Fig. 162
Change objective window
