CENTER SCREEN AREA / IMAGE CONTAINERS - …
LSM 710 and LSM 780
Carl Zeiss
Topography View
Systems
210 M60-1-0025
e
02/2010
6.12.2
Control Block: 3D
If 3D is chosen within the Display block, following
settings can be applied in the 3D control block
(Fig. 240
).
In the first row
Profiles
,
Grid
,
Filled
or
Surface
can be chosen.
Parameters that can be set:
−
Profile distance
slider: Setting of the
distance of profiles.
−
Grid distance
slider: Setting of the mesh
value of the grid.
−
Offset
slider: Used to push through a color
LUT Look Up Table (e.g.: if the
Rainbow 2
is
used as channel color)
Using
Profiles
or
Grid
, the Profiles/Grid (x, y, z
matrix) and x, y, z-triples (x, y, z table) can be
copied to clipboard and exported by a right mouse
click (Fig. 241).
Please make sure that the amount of
exportable data is adequate to the
maximum importing size of the following
software package. To lower the amount
of data points, use the profile distance
slider.
In case of
Surface
the renderer item can be set,
clicking into the right part of the
Surface
button
(Fig. 242).
OpenGI - software
The graphics calculation is performed using the
installed software.
OpenGI - hardware
The graphics calculation is accelerated by using the
installed graphics processor.
Fig. 240
Image view control block - 3D
Fig. 241
Context menu using 3D Grid
Fig. 242
Surface renderer items
