NOTES ON DEVICE SAFETY
LSM 710 and LSM 780
Carl Zeiss
User Interface
Systems
36 M60-1-0025
e
02/2010
1.11.6
Changing the Filter Modules in the LSM
BiG
You can remove and replace filter modules by push and click.
When opening the filter insert, the safety control will switch off the laser light.
To exchange the filter module of the LSM
BiG
proceed as follows:
•
Loosen the two knurled screws (Fig. 34/
2
).
•
Remove the filter insert (Fig. 34/
3
) of the LSM
BiG
(Fig. 34/
1
) and put it down.
How to uninstall a module:
•
Disengage the filter module (Fig. 35/
4
) from the upper spring elements (Fig. 35/
2
) of the filter insert
(Fig. 35/
5
) by tilting it forward, then lift it off the lower spring elements (Fig. 35/
1
) and remove the
module.
How to install a module:
•
Insert the filter module (Fig. 35/
4
) with the aid of its mounting elements on its left and right (
9
Fig. 35/
3
)
into the lower spring clips (
1
Fig. 35/
1
) on the filter insert.
•
Press the filter module against the upper spring clips (
1
Fig. 35/
2
) until it engages firmly.
•
After exchanging the filter module, replace the filter insert (Fig. 34/
3
) into the LSM
BiG
(Fig. 34/
1
).
•
Fasten the two knurled screws (Fig. 34/
2
).
Fig. 34
Filter insert of the LSM
BiG
Fig. 35
Changing the filter module