TOOLS, ADDITIONAL SOFTWARE
LSM 710 and LSM 780
Carl Zeiss
3D for LSM
Systems
20 M60-1-0025
e
02/2010
The
Output
histogram shows the resulting histogram. The horizontal axis represents the grey values from
0 to the maximum, which is either 255 or 4095, depending whether the input is 8 bit or 12 bit. The
vertical axis represents the pixel count. The selected range is marked by the borderlines in the histogram.
The blue line or
L
indicates the lower boundary, the red line or
H
the upper one,
C
indicates the center of
the range.
There are three ways to change the range: clicking and dragging the borderlines with the mouse.
Entering a new value in the appropriate text boxes, clicking on the buttons
or using the arrow keys
from the keyboard. To alter the values within the histogram move the mouse pointer over one of the
three coloured lines until the shape changes. Press and hold the left mouse button to move the line to a
new position. To change the values with the arrow keys click once into the histogram. Using the left or
right arrow key by its own will move the whole range. Pressing the
Shift
key additionally moves the
lower boundary, the
Control
key the upper boundary.
The vertical scale of the histogram is set using the scroll bar. The units are percents of the maximum grey
value distribution. This setting has no influence on the function.
Parameters:
Input
Input image sequence
Output
Output image sequence
Channel
Selection of the channel numbers for the
Output
image after contrast
enhancement
Clip Grey Values
Clipping of grey values to the
Low (L)
and
High (H)
output grey values
boundaries
Input
L
Lower boundary of grey value range
Input
Input
C
Center of grey value range
Input
Input
H
Upper boundary of grey value range
Input
Output
L
Lower boundary of grey value range
Output
Output
C
Center of grey value range
Output
Output
H
Upper boundary of grey value range
Output
