CONFOCOR
3
Carl Zeiss
System Configuration
ConfoCor 3
22 M60-1-0025
e
02/2010
(2)
Loading a predefined beam path
You can select a saved beam path configuration by the drop down menu. The selected beam path will
than be loaded and shown with its settings in the displayed diagram. You can alter the beam path if
required.
Procedure to load and reconfigure an existing beam path:
•
Select a corresponding beam path from the
Light Path
drop down menu list box.
•
Change settings as required.
•
Save the configuration under the old name to overwrite the existing configuration or under a new
name to keep the old configuration.
(3)
Define a new beam path
A new light path is defined by choosing the appropriate filters, dichroics and laser lines in the
Light Path
diagram. From top to bottom you have the following dichroics and filters available:
