CONFOCOR
3
ConfoCor 3
Action Buttons
Carl Zeiss
02/2010 M60-1-0025
e
97
(b) Data
•
Save
allows you to save the whole data set
(curves, fitting results, fit parameters, raw data)
to a disk. If
Save
is pressed you will have the
choice between
FCS data files (.fcs)
without
raw data or
FCS files with raw data (.fcs)
attached by selecting the appropriate settings
from the pull-down menu (Fig. 99).
Note that raw data are only available, if the
FCS files with raw data was selected.
The
Save
FCS
menu offers the possibility of
entering a file name in the
Name
field and to
choose an appropriate .
Directory
.
Note that it is only possible to store the data as ANSI text. Binary file formats of previous releases
are no longer available.
If
raw data
were saved along with the FCS file, the raw data of each single measurement channel
will be stored attached to the .fcs file. .raw files will bear the same name than the .fcs file with
name extensions, which identify the repetition and the channels.
You can enter a sample comment in the
Sample Comment
display box by typing. This comment
will be saved along with the data.
Save Table
With
Save Table
, the result table can be saved in a separate text file. If the button is clicked, a file menu
will appear offering the possibility to select a directory and to enter a file name.
Copy Table
With
Copy Table
, the whole table will be copied to the clipboard. The contents of the clipboard can be
used by most WINDOWS applications via the
Paste
function.
Copy Graphs
With
Copy Graphs
the displayed graphs will be copied to the clipboard. You can paste the graphs into
other WINDOWS applications.
Export
With
Export
, the measured data will be exported in a ConfoCor 1-compatible format and can be
handled using the FCS Access Fit program. In the
Export
window you can enter a name in the
File name
field and a type in the
Data type
field. In the
Save
pull down menu you can select a directory. You can
specify if only the selected rows (highlighted), the Current row (the current selected one) or all rows are
exported. Exported files can be opened again with the
Open FCS
button. All selected files will be loaded
in one
FCS Correlation diagram
.
Fig. 99
Save Raw Data window
