28
02/2010
You have the following options:
Activate the
FCS Fit
panel to display fitted data (Fig. 36).
Set the red and blue bars to define the start and end points of the curve fit window.
Load a predefined model from the Model drop-down menu. You can assemble a model
by pressing the
Model
tool in the
ConfoCor
tool group.
Define the conditions of the fit by activating / deactivating terms, setting the type of a
parameter (fixed, free, or start value), defining limits and globally link parameters in the
Model
table.
Pressing the
Fit
button will fit the current loaded correlation functions to the defined
model. The fitted data will be displayed in the
Model
and
Result
tables.
Pressing the
Fit all
button will take all ticked channels and fit them according to the
chosen model.
Pressing the
Undo
button will cancel the last operation, or previous ones as well, if the
button is pressed repeatedly.
Pressing
Redo
will redo the last cancelled operation, or previous ones, if the button is
pressed repeatedly.
Pressing the
Write to Method
button will write back the settings to the method. If the
method is stored, the settings will be active when the method is selected the next time.
