Safety instructions
●
Caution: Never look into the sun or into laser light sources with the PhotoScope.
This can lead to serious injury to the eyes.
●
Do not leave the product for a long time in the sun without protective cap or not in a
case. The lens and eyepiece can function as a burning glass and damage the interior
components.
●
To reduce the danger of a fire, an electric shock or annoying interferences, only use the
accessories authorised by Carl Zeiss and the original plug-in power supply unit,
order no. 0504-821 (12 V DC/800 mA with 5.5 mm barrel connector), as well as the
rechargeable batteries and battery types mentioned in the instructions.
●
Do not leave the device in rain or moisture with mains operation.
Operating with the plug-in power supply unit is only permissible in closed buildings.
●
You should only operate the device with the plug-in power supply unit if the nominal
voltage of the plug-in power supply unit matches the local mains voltage.
Check the nominal voltage of the device and make sure you use the correct power
plug.
●
In emergencies (e.g. if the housing, controls or power line are damaged by penetration
of liquid or foreign bodies), turn the device off immediately, unplug the power plug,
remove the rechargeable battery and contact your retail store or our Hotline.
●
Incorrect placement of the batteries or rechargeable batteries poses a risk of explosion.
●
Handle all batteries, rechargeable and normal, according to the manufacturer’s instructions.
They should not be thrown into a fire, heated, disassembled or broken.
Do not use faulty batteries. Normal batteries must never be recharged.
●
Never open or disassemble the PhotoScope or the recharger or the batteries (risk of
electric shock, burning, acid).
●
Never immerse the device in water.
●
Do not force the monitor open and do not turn it beyond the permissible settings.
Do not press hard on the monitor. This can result in uneven colors on the monitor or
malfunctions.
6
