Blowing pull line into cable conduits (ø 25-200 mm)
Operating Manual EZ300 Version 05/2021
page 25 / 30
20.
Minimize Wear and Avoid Damage
Observing the details in the operating instructions helps reduce the risk of unnecessary wear and damage to the
power tool.
The power tool must be operated, maintained and stored with the due care and attention described in the
operating instructions.
The user is responsible for all damage caused by non-observance of the safety precautions and operating and
maintenance details in the Operating Instructions. This includes in particular:
•
Alterations or modifications to the product not approved by ZEITLER AG
•
Using tools or accessories which are neither approved or suitable for the product or are of a poor quality
•
Using the product for purposes for which it was not designed.
•
Using the product for sports or competitive events.
•
Consequential damage caused by continuing to use the product with defective components.
Maintenance Work
All the operation
s described in ’Maintenance and Care’ must be performed on a regular basis. If these
maintenance operations cannot be performed by the owner, they should be performed by a servicing dealer.
ZEITLER AG recommends that you have servicing and repair work carried out exclusively by an authorized
servicing dealer. Dealers are regularly given the opportunity to attend training courses and are supplied with the
necessary technical information.
If these maintenance operations are not carried out as specified, the user assumes responsibility for any damage
that may occur. Among other parts, this includes:
•
Damage to the engine due to neglect or deficient maintenance (e.g. air and fuel filters), incorrect
carburetor adjustment or inadequate cleaning of cooling air inlets (intake ports, cylinder fins)
•
Corrosion and other consequential damage resulting from improper storage.
•
Damage to the machine resulting from the use of poor quality replacement parts.
Some parts of the power tool are subject to normal wear and tear even during regular operation in accordance
with instructions and, depending on the type and duration of use, have to be replaced in good time. Among other
parts, this includes:
•
Filters (air, fuel)
•
Blower wheel
•
Rewind Starter
•
Spark plug
