Pull line blowing in conduits (ø 18-50 mm)
EZ50 Operating manual version 11/2018
page 4 / 24
1.
Important Instructions
Congratulations on your purchase of an EZ50 Stringing Gun which is a product of the
highest quality. The following instructions must be observed without fail and relevant
regulations complied with, in order to guarantee the product remains functionally
efficient and has a long service life.
As with all electrical equipment, when using this Stringing Gun, particular care must
be taken to avoid personal injury and damage to equipment.
2.
Safety Precautions and Working Techniques
Special safety precautions must be observed when working with an
electrical tool.
It is important you read and understand the operating instructions before using your
machine for the first time. Always keep the Operating Instructions with the EZ50 for
future reference. Non-observance of the
safety precautions may result in serious or even fatal injury.
Observe all application such as local safety regulations, standards and ordinances of
for example Government, Insurances, Associations etc.
If you have not used this machine before: Have your dealer or another experienced
user show you how to operate your machine properly.
Minors should never be allowed to use this machine except for minors of more than
16 years and being trained under supervision during their apprentice.
Do not lend or rent your machine without the operating instructions. Be sure that
anyone using the EZ50 understands the information contained in the operating
instructions.
Bystanders, especially children, and animals should not be allowed in the area where
the machine is in use.
Inform all people present on possible dangers.
When the machine is not in use, disconnect the mains plug and place it so that it
does not endanger others. Secure it against unauthorized use.
The power tool user is responsible for avoiding injury to third parties or damage to
their property.
Do not blow towards people, animals or objects!
In some countries, the operation of noise emitting electrical tools is restricted by local
regulations. Observe country specific requirements and regulations.