6.0 PRINCIPLES OF OPERATION
ZEKS Eclipse
TM
90-5,000ZPB Desiccant Dryers
www.zeks.com
12
% REMAIN:
Part life remaining before replacement is recommended.
STAT:
Status of Part
CHG:
Part should be inspected & replaced
OK:
Part functioning as intended
DESICCANT:
Useful desiccant life remaining based on operating hours.
Recommended time for inspection and determination of replacement
requirement.
FILTER REGULATOR ELEMENT:
Condition of
fi
lter element based on
operating hours. Filter element should be inspected periodically and
replaced as required to ensure proper operation of Control Air Valves.
MAINTENANCE
ALERTS
SCREEN 2/5
OPERATING HOURS:
Total operating hours since Dryer startup date.
PURGE HOURS:
Total hours Purge Valves have been active.
PURGE TIME %:
Percentage of dryer operating time Purge Air is utilized.
This is dependent upon operating conditions and the demand on the dryer.
MAINTENANCE
ALERTS
SCREEN 3/5
SERVICE REMINDER:
Enables user to setup Service Reminder Interval
for key components. An alert will be displayed indicating that inspection &
replacement may be required when the time Interval is reached.
INLET FILTER:
Reminder Interval (Weeks)
OUTLET FILTER:
Reminder Interval (Weeks)
MAINTENANCE
ALERTS
SCREEN 4/5
SERVICE REMINDER:
Enables user to setup Service Reminder Interval
for key components. An alert will be displayed indicating that inspection &
replacement may be required when the time Interval is reached.
DESICCANT:
Reminder Interval (Weeks)
CONTROL AIR FILTER/REG ELEMENT:
Reminder Interval (Weeks)
MAINTENANCE
ALERTS
SCREEN 5/5
LANGUAGE:
Press +/- key to select desired language.
UNITS:
Press +/- key to choose either Imperial or Metric units.
GENERAL
SETTINGS
SCREEN 1/3
6.9.7 GENERAL SETTINGS
Access for setting Time & Date; Language (English is default); Backup Solenoid drain adjustment.
TIME:
Time is displayed in 24 hour format (Military Time).
DATE:
MM/DD/YY can be altered to DD/MM/YY in TECHNICIAN MODE
Screen 12.
Press Return key to highlight value to be changed then press ENTER
button to set desired value. Use Right Navigation key to move cursor to
change the value in each row.
GENERAL
SETTINGS
SCREEN 2/3
