44
HDA800(V2) Serial Protocol, Version 1.3, 9/12/13
Advanced Control
Response String:
There is no response string to the SS command, this command is write only.
Where ‘settings’ is a bitmapped parameter defined as:
Bit-0
- Save zone input/output mappings, and power state
Bit-1
- Save switch delay times set by the ‘DZ’ command
Bit-2
- *Reserved*
Bit-3
- Save control settings (the ‘XS’ command settings)
Bit-4
- *Reserved*
Bit-5
- Save IP parameters and settings (‘IPA’, ‘IPM’, ‘IPG’, and ‘IPSET’ settings)
Bit-6
- *Reserved*
Bit-7
- *Reserved*
Bit-8
- Save zones’ volume settings
Bit-9
- Save zones’ audio parameters (bass, treble, eq, mute level, zone gains, zone lipsync, etc. all but volume)
Bit-10
- Save source audio parameters (input gains, input lipsync delay)
Bit-11
- Save global audio parameters (master volume, volume and mute fade times)
Bit-15
- Save HDMI settings: EDID and HDCP caches, HDCP key counts, and the EDID lock state.
Note: The HDA800(V2) must be powered on before sending the “Save HDMI settings” (Bit-15).
‘FS’ Reset to Factory Settings
This command will reset selected parameters of the HDA800(V2) to their factory default settings.
This command uses a bitmapped parameter to indicate which values are to be reset. A bit set to ‘1’
indicates the associated setting should be reset, a bit set to ‘0’ indicates the setting should not be reset
and the previous setting will remain unchanged.
Command formats:
^FS
settings
$
Reset the parameters indicated by ‘settings’
Response String:
There is no response string to the FS command, this command is write only.
Where ‘settings’ is a bitmapped parameter defined as:
Bit-0
- Reset zone input/output mappings, and power state
Bit-1
- Reset switch timings (the ‘DZ’ command settings)
Bit-2
- *Reserved*
Bit-3
- Reset control settings (the ‘XS’ command settings)
Bit-4
- *Reserved*
Bit-5
- Reset IP parameters
Bit-6
- *Reserved*
Bit-7
- *Reserved*
Bit-8
- Reset zones’ volume settings
Bit-9
- Reset zones’ audio parameters (bass, treble, eq, mute level, zone gains, zone lipsync, etc. all but volume)
Bit-10
- Reset source audio parameters (input gains, input lipsync delay)
Bit-11
- Reset global audio parameters (master volume, volume and mute fade times)
Bit-15
- Reset HDMI settings: Clear EDID and HDCP caches, clear HDCP key counts and the EDID lock state.
Value
32768
16384
8192
4069
2048
1024
512
256
128
64
32
16
8
4
2
1
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Value
32768
16384
8192
4069
2048
1024
512
256
128
64
32
16
8
4
2
1
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Summary of Contents for HDA800
Page 1: ...HDMI Matrix Switches HDA800 HDA800 V2 User Guide ...
Page 2: ......
