17
6. Different brands
Follow these steps for correct installation
WARNING:
• Do not place the Zeliox Compact upside down or on its back.
1. All cables should be prepared and routed according the local
regulations.
2. Use the measurements for
placing the Zeliox Compact.
The 4 mounting holes should
be located according to
drawing, 7mm round. The
minimum required space
around the Zeliox is shown
as solid line.
3. Make sure the air intake and
outlet are free. Use M6 bolts.
4. Place 4 spacers (5mm) in
between the surface and
the underside of Zeliox
Compact.
5. Make sure the cable section
and the Earth Leakage
Switch at the back of the
Compact are serviceable,
and the cables do not kink.
6. See User & Installation
Manual page 25 for further
instructions.
7. Connect the cables to the
Zeliox Compact.
8. Zeliox Compact is
ready for use.
303
385
249
385
54
505
365
27
35
60
60
60
60
35
81
Front Zeliox Compact
Back Zeliox Compact
Summary of Contents for Compact
