11
3. Engine run signal
3.1 Setting engine running signal
3.1.1 Introduction
The engine running signal is used by the Zeliox Compact to detect whether
the alternator produces voltage. If this signal is not adjusted properly, there
is a chance that the Zeliox Compact will not be charged or that the battery
of the vehicle will be drained by the Zeliox Compact.
The engine running signal of the Zeliox Compact can be set via the main
screen of the Zeliox Compact (software-wise), this in contrast to the D +
boxes which must be adjusted with a set potentiometer.
3.1.2 Required materials
The following materials are needed to set the engine running signal:
• Vehicle
• (Digital) Voltmeter
• Pin code
3.1.3 Procedure
Follow the following procedure:
1. Measure the voltage on the battery when the engine is idling, note this
value as V battery.
2. Measure the voltage on the battery with idling motor, note this value
as V idle.
3. Start the Zeliox Compact.
4. Go to the settings menu:
Note:
A PIN code is required
for this menu.
5. Enter the PIN code (0000).
Summary of Contents for ZEL16-1,2-EU
