15
5. Operating conditions
5.1 Operating the Zeliox Compact
5.1.1 Introduction
This chapter describes the various Zeliox Compact modes and how to get
into these modes.
5.1.2 Zeliox off
In this mode, the Zeliox is completely off:
• Led in power switch off
• Display off
• No voltages on the outlets
In this position the main battery is continuously monitored to detect
undervoltage. Undervoltage will eventually damage batteries beyond repair.
In case of damage, they will have to be replaced by a Zeliox expert.
5.1.3 Zeliox Compact operating condition “on”
In this state the Zeliox Compact is not connected to the mains, and
the 230V inverter is switched on. 230V will be applied to both front
(schuko socket) and the back (fixed connection for users). This output is
immediately available, but can be switched via the 230V-out icon on the
touch screen.
• USB 5V/2A is not switchable and always available, unless the Zeliox
Compact is switched off.
• The 12V output is available and can be turned on via the 12V icon on the
touch screen.
• The white LED in the on/off switch lights up constantly as an indication
that the Zeliox Compact is on.
5.1.4 Enable “on” operating state
The Zeliox Compact can be switched on by the on/off switch. There are
more ways to turn the Zeliox Compact on: via the mains or incoming power
via 12V. For more information, see the following chapters.
Summary of Contents for ZEL16-1,2-EU
