28
2.1.2 12V out connector
The 12V output can be switched by the control screen. When switched
on, the output voltage will be equal to the internal battery voltage, so it is
between 10.2 and 14.4 volts. The 12V output is secured with a fuse of 25A.
Connector type: Anderson SB50 grey.
2.1.3 Earth leakage switch
The device protects the user from unsafe situations related to the 230V
output.
2.1.4 230V in connector
This connects the Zeliox Compact to the mains. The input voltage may
be between 220 and 240V with a frequency of 50Hz. The built-in charging
protocol of the Zeliox charges the internal battery according to the charging
specification of LifePO4 batteries.
Connector type: IEC C19, a charging cable is included as standard.
2.1.5 12V in connector
The Zeliox Compact can be connected to a vehicle by this connector.
The input voltage is between 10 and 15V. A built-in charging program
charges the internal battery.
Connector type: Anderson SB50 red.
2.1.6
GPS antenna in (optional)
A GPS tracking system is optional in the Zeliox Compact. If built-in, the GPS
antenna can be connected to this connector.
Connector type: SMA.
2.1.7 USB Data
This USB is to upload new firmware.
2.1.8
Connector for remote control (optional)
This connector can optionally be connected to a dashboard switch,
the contact-on signal and the immobilizer.
This connector contains the following signals:
• LED +/-
• Switch 1/2
• Contact to signal
• Shore indication (start breaker)
The optional package contains the following components:
• Switch
• Cable (option 5 or 10 meters)
• Switch socket
Summary of Contents for ZEL16-1,2-EU
