Zelmer 17Z016, User Manual

46

The  kettle  switches  off  automatically  when  the  water  has  reached 

–

the boiling point, the switch returns to its starting position – the light 

comes off.
If further use of the kettle is anticipated, it is not necessary to remove 

–

the plug of the connecting cord from the power socket.

WARNING:

 Be careful not to fill up with water beyond the nominal capac

-

ity when pouring water into the kettle. The rising of the water level in the 

kettle is delayed in relation to the speed of pouring the water. It is caused 

by the filter slowing down the speed of the flow. This can be prevented 

by pouring the last portions of water extremely carefully before it reaches 

the maximum level on the indicator.

In the event that an empty kettle is switched on, it will be switched off by 

a thermal device automatically. 

In order to switch the kettle on again after it has cooled down (approx. 

15 minutes), take it off the base, replace it and switch the kettle on by 

pressing switch 

(6)

. The cooling down of the kettle can be accelerated by 

puring cold water into the kettle.

1.  Description of the function selection buttons: keep warm/boiling

Both switches (boiling and keeping warm) may be used together or sepa

-

rately to allow activation of different functions.

Press the boiling button 

–

(6)

 – the kettle will automatically switch off 

after the water has boiled.
Press  the  „keep  warm”  button 

–

(7)

  –  the  kettle  will  quickly  warm  up 

water to the pre-set temperature and will keep it warm at this tem

-

perature.
Press both buttons together – first the kettle will boil the water and 

–

then, after reaching the pre-set temperature, it will keep the tempera

-

ture.
Press the boiling button 

–

(6)

 or „keep warm” button 

(7)

 again to cancel 

the settings.
Each activity, pressing a button or another action, is accompanied by 

–

a signal sound.

2.  „Keep warm”

The  number  of  settings  and  the  temperature  of  different  settings  is 

changeable; it may be adjusted to an individual customer’s needs.

3.  Lighting:

Boiling mode – change of colour from blue to red.

–

Keep warm mode – soft, changing lighting illumination.

–

Keep  warm  function  –  the  color  of  the  lamp  indicates  the  set  tem-

–

perature.

Cleaning and maintenance

Always clean a cold kettle!

–

Remove the plug of the connecting cord from the power socket.

–

Take out the filter 

–

(9)

.

Clean the outside surfaces with a soft cloth moistened with washing-

–

up liquid.
In  order  to  remove  the  build-up  of  hard  water  film  from  the  outside 

–

and inside walls of the kettle, wipe them with a cloth moistened with 

vineger.
Rinse the kettle with fresh water.

–

Filter replacement – descaling

In the event that scale builds up on the bottom of the kettle, it needs to be 

removed. 6% or 10% vinegar is used for this purpose.

Open the lid 

–

(5)

.

Take out the filter 

–

(9)

.

Wash the filter under running water.

–

Pour 0.5 l of vinegar and switch on the kettle.

–

Boil the vinegar and leave in the kettle for about 30 minutes.

–

Pour the vinegar out and rinse the kettle with fresh water.

–

Fill the kettle up with fresh water, boil the water and pour it out after 

–

is has boiled.
Repeat the above procedure if there still is scale on the bottom.

–

When the procedure is finished, replace the fiter 

–

(9)

 in the kettle, fol

-

lowing the procedure of taking the filter out in reverse order.

Negligence in descaling the kettle may results in its damage.