Zelmer 24Z013, User Manual

26

GW24-011_v02

Dear Clients!

Congratulations on your choice of our appliance, and welcome among the users of Zelmer prod

-

ucts.
In order to achieve best possible results we recommend using exclusively original Zelmer accesso

-

ries. They have been specially designed for this product.
Please read this instruction manual carefully. Pay special attention to important safety instructions. 

Keep this instruction manual for future reference.

IMPORTANT SAFETY INSTRUCTIONS

Please connect the fan to 220–240 V mains supply.

–

Do not unplug by pulling by cord.

–

Do not use the appliance, when the casing, protecting grill or the cord is visibly damaged.

–

If the non-detachable part of the cord is damaged, it should be replaced by the producer or at 

a proper service point or by a qualified person in order to avoid any hazards.

The appliance can be repaired by qualified staff only. Incorrectly performed repair may cause 

serious hazard to the user. In case of any defects, it is advised to return the appliance to an 

authorised service facility.

Disconnect fan from mains supply outlet when moving from one location to another.

–

Never insert fingers, pencils, or any other object through the grille when fan is running.

–

Disconnect fan from mains supply outlet before cleaning.

–

Disconnect fan from mains supply outlet when removing grilles.

–

Make sure that you disconnected fan from mains supply outlet (remove the plug from the socket) 

–

when removing housing (protecting grilles).

Make sure fan is on a stable surface when operating to avoid overturning.

–

Do not use fan in window. Rain may create electrical shock hazard.

–

This  appliance  is  not  intended  for  use  by  persons  (including  children)  with  reduced  physical, 

–

sensory  or  mental  capabilities,  or  lack  of  experience  and  knowledge,  unless  they  have  been 

given supervision or instruction concerning use of the appliance by a person responsible for their 

safety.

Children should be supervised to ensure that they do not play with the appliance.

–

TECHNICAL DATA AND BINDING STANDARDS

The fan is II class appliance and it meet the requirements of binding standards.

The appliance meets the requirements of the following directives:

Low Voltage Device (LVD) – 2006/95/EC.

–

Electro- Magnetic Compatibility (EMC) – 2004/108/EC.

–

The product is marked with CE symbol on the name plate.

Voltage: 220–240 V/50 Hz.

●

Power: 28 W.

●

Propeller diameter – 23 cm.

●

2 air flow speeds.

●

Horizontal oscillation.

●

Oscillation blockade.

●

Fan leaning angle setting (upwards, downwards).

●

Fan technical data are presented on the name plate.

EN