Zelmer 490.30NP, User Manual

45

490-004_v01

Blenders are manufactured in II insulation class, they do not 
require grounding 

.

ZELMER blenders comply with all current norms.

The appliance complies with current directives:

Low Voltage Directive (LVD) – 2006/95/EC.

–

Electro-magnetic compatibility (EMC) – 2004/108/EC.

–

The appliance is marked with CE symbol on its data plate.

Appliance specifications 

(Fig. B)

 basic blender accessories

additional equipment, which you can buy in shops.

Starting and setting the required speed

With  the  proper  blade  installed,  plug  the  power  cord  into 

the  power  supply  outlet  and  get  the  appliance  started  by 

pushing  button 

.  The  blades  can  be  smoothly  set  to 

rotate at different speeds, which is easily set by turning the 

speed selector in the range from 1–12. The highest rotation 

is obtained by pushing the button “turbo” , no matter which 

rotation is set on the speed selector.

  The  appliance  is  in  operation  only  when  the 

switch 

  or  „turbo”  is  pressed.  Releasing 

of any switch shall cause the blender drive is 

instantly off.

Preparing the blender to use

USING PLASTIC SHAFT (Fig. C)

ZELMER hand blender with the plastic shaft can be used for 

home cooking, preparing foodstuffs for children and drinks. 

It is especially recommended for pureeing cooked and raw 

vegetables,  soft  fruit  (with  no  stones),  mixing  up  different 

beverages  or  preparing  dips,  sauces,  soups  or  other  soft-

textured foods.

  Before  assembling  on  and  removing  the 

attachment,  make  sure,  that  the  plug  of  the 

supplying cord is disconnected from the mains 

supply outlet.

1

 Fill up the beaker, no more than the MAX level.

2

 Attach  plastic  shaft  to  drive  shaft,  align  them  in  the 

position according to the indicators on the cover of the drive 

shaft and the coupling. Then twist the drive shaft clockwise 

(the direction is shown by the arrow) until you hear that it has 

clicked (the indicator on the coupling should be in a closed 

position.

3

 Plug the power cord to the power supply socket.

4

 Plunge the coupling in the products to be mixed.

5

 Then  start  –  up  the  appliance  pressing  the 

  switch 

and set the required gear as necessary.

Appliance description 

(Fig. A)

1

 Drive

2

 Button 

 – switch on/switch off

3

“turbo”

 button

4

 Speed selector

MIXING ATTACHMENT SET

5

 Plastic shaft

6

 6. Beaker for mixing with scale and hermetic lid

WHISK SET

7

 Whisk gear

8

 Whisk

MINI FOOD PROCESSOR SET

9

 Mini food processor cover with transmission

10

 Mini food processor blade

11

 Cover

12

 Mini food processor container

ICE CRUSHER SET

13

 The ice crusher container

14

 Double-  sided  disc  of  ice  crusher  for  first  level 

granulation  I  (smaller  size 

A

)  and  second  level 

granulation “II” (bigger size 

B

)

15

 Spindle

FOOD PROCESSOR SET

16

 Food processor lid

17

 Pusher

18

 Base of the food processor

19

 Food processor compartment

20

 Permanent guard

21

 Disc driver

22

 Double sided disc for thick and thin slices

23

 Double-sided disc for chipping and purée

Technical data

Type 480 – 400 W / Type 490 – 600 W

Drive shaft maximum working time:

with a plastic shaft 

3 min.

–

with whisk attachment 

3 min.

–

with the mini food processor 

2 min.

–

with food processor

–

(only with motor Type 490 – 600 W) 

2 min.

with ice crusher  

2 min.

–

Idle time before reusing (min.) 

20 min.

Appliance noise with the (L

WA

):

blending attachment 

65 dB/A

–

beaters 

78 dB/A

–

mini food processor 

73 dB/A

–

food processor

–

 83 dB/A

ice crusher  

78 dB/A

–