40
CK1151-001_v01
Cleaning and maintenance
C
Always allow the kettle to cool down completely
before cleaning!
1
Unplug the kettle from the mains.
2
Clean the outside surfaces with a soft damp cloth and
washing-up liquid.
In order to remove the build-up of hard water film from the
outside and inside walls of the kettle, wipe them with a damp
cloth and vinegar.
3
Rinse the kettle with fresh water.
Various black-coloured, rusty, milky, etc.
deposits may form inside the kettle and float on
the water. This is caused by minerals occurring
naturally in water (calcium, magnesium, iron,
etc.). Such discoloration is not caused by faulty
operation of the appliance and does not affect
its use. In case of substantial accumulation of
mineral deposits, proceed as described in the
“Descaling” section.
Descaling
In the event that scale builds up on the bottom of the kettle,
it needs to be removed. For this purpose use 6-10% vinegar
or citric acid.
●
Open the lid by pressing the lid release button
(5)
.
●
Add 0.5 l of vinegar or 40 g of citric acid and fill the
kettle with water up to the maximum level. Switch on the
kettle.
●
Bring the mixture to boil and allow the kettle to stand for
30 minutes.
●
Empty the kettle and rinse it with fresh water.
●
Fill the kettle with fresh water, boil the water and empty
the kettle.
●
If sediment is still visible in the kettle, remove it with
a sponge and rinse the kettle again. If unsuccessful,
repeat the descaling process.
The kettle should be descaled periodically to
avoid its possible damage.
The importer/manufacturer is not liable for any damages resulting
from improper use or handling of the appliance.
The importer/manufacturer reserves the right to modify the product
at any time and without prior notice in order to adjust it to valid law
regulations, norms, directives, or due to construction, trade, aesthetic
or other reasons.
Ecology – environment protection
Each user can help protect the environment.
It is neither difficult nor expensive. In order
to do it, remember to discard the cardboard
packing into a recycling paper container and
the polyethylene (PE) bags into a container for
plastics.
Dispose of the worn out appliance by handing it over to
a local disposal centre, as the dangerous elements of this
appliance can be hazardous to the environment.
Do not dispose the appliance together with other
domestic wastes!
Summary of Contents for ck1151
