125
CM2004-001_v03
9
Next place the container under the fi lter holder, and press
the 2-cup button.
Repeat the process twice.
10
After the second cycle wait 15 minutes, and repeat the
process again and again, until there is no solution in the
container left.
11
Repeat descaling this time by fi lling the container with
clean water.
After descaling, continue with 2-3 cleaning
processes with clean water, as described in the
paragraph Before Use.
CLEANING THE STEAM NOZZLE
If the nozzle is clogged due to careless use, it is necessary
to clean it and its rubber elements.
Before cleaning the steam nozzle, make sure it
is not hot.
Please follow the steps below to thoroughly clean the steam
nozzle.
1
Remove the metal casing from the nozzle by pulling it
gently downwards.
2
There is a key for unscrewing the nozzle situated in
the coffee scoop. Use it to unscrew the nozzle by turning it
clockwise.
3
Clean all elements with warm, running water with an
addition of a gentle dishwashing liquid. Carefully dry each
and every element before reassembling them
You may use a needle or a pin to unclog the
nozzle.
4
Reassemble all the elements in an order reverse to
disassembly.
5
Carefully put on the metal casing on the rubber holder to
avoid any leakiness.
Summary of Contents for CM2004M Quatro
Page 128: ...CM2004 001_v03 ...
