Zelmer HD1002, User Manual

33

HD1002-001_v02

Ecology – Taking care of the environment!

Each user can contribute to protection of environment. It is 

neither difficult nor too expensive. To do it:

Cartoon  packaging  is  to  be  disposed  of  as  waste  paper. 

Polyethylene  (PE)  foil  packaging  is  to  be  placed  in 

a container for plastic. Used appliance is to be returned to 

a proper collection point, as dangerous parts 

of  the  appliance  can  cause  environmental 

hazard.

Do  not  throw  it  out  together  with 

household garbage!!!

It is best to set your dream hairstyle by setting delicate 

●

air stream and preferred temperature.

When  hair  dryer  is  switched  on  the  ionisation  function 

●

is  switched  on  automatically  thanks  to  which  you  will 

easier set your dream hair style and your hair will remain 

healthier.

In order to fix the hairstyle press and hold the switch of 

●

cold blow 

(6)

.

After the drying is finished place the switch of air stream 

●

strength  regulation 

(4)

  in  position  "0"  and  temperature 

regulation switch 

(5)

 in position „1”.

After each use always unplug the appliance.

●

Immediately  after  the  use  accessories  can  be  hot. 

●

Always leave the appliance to cool down before removal 

of accessories.

Cleaning and maintenance of hair dryer

After each use switch off and unplug the hair dryer.

●

Never put hair dryer, power supply cord or plug in water 

●

or any other liquid.

It is recommended to remove from time to time the air 

●

inlet cover 

(2)

 in order to clean it and the net filter 

(3)

, 

located under the cover.

When required clean hair dryer casing with a dump cloth 

●

(it can be moistened with some washing-up liquid) dry it 

out or wipe it till dry.

Do not use scrubbing agents or solvents.

●

Carefully dry all the parts which have been cleaned.

●

CLEANING  AIR  INLET  COVER  AND  NETLIKE  FILTER 

(Fig. B)

1

 Remove the air inlet cover 

(2)

 turning it anticlockwise.

2

 Remove the sieve filter 

(3)

.

3

 Clean  it  and  wipe  it  using  a  dry  or  dump  cloth.  After 

drying place it in the previous place.

4

 Affix the air inlet cover 

(2)

 turning it clockwise.

STORAGE

If you are not using the appliance always unplug it.

●

After use wait till the hair dryer cools down and place it in 

●

a dry, cold and unavailable to children place.

Never turn the cord around hair dryer as it causes the 

●

risk of premature wear risk of cord damage. In order to 

ensure its long lasting operation the cord is to handled 

with care, avoiding tugging, twisting or pulling, especially 

when  unplugging.  If  the  cord  gets  twisted  during 

operation it should be straightened from time to time.

The  manufacturer/importer  cannot  be  held  responsible  for  damage 

caused by improper use or improper service.

Manufacturer/importer claims the right to modify the product any time, 

without prior notice, in order to adjust to law norms and directives or 

because of constructional, commercial, esthetic and other reasons.