40
ZCM4821-001_v01
●
Clean the milk frother nozzle with a thin needle.
●
Mix 200 ml of water with the corresponding quantity of milk cleaning solution. Refer to
the instructions on the cleaning solution for the exact quantity.
●
Leave all parts of the milk frother in the cleaning solution for 5 hours or over night.
●
Subsequently use the brush of the measuring spoon to clean all parts of the milk
frother nozzle. Make sure that all vents of the milk frother and its nozzle are cleaned
with the brush.
●
Replace the frother nozzle in the milk frother and lock the nozzle by turning it 45° with
the rounded end of the measuring spoon.
1
●
Replace the lid
1
(pay attention to the direction).
●
Replace the milk frother in the coffee machine and push the lever downwards to lock.
●
Insert the end of the milk hose into the opening on the upper left of the milk frother until
it stops and press the milk hose into the guide.
●
Close the door of the coffee dispensing unit. When closing the door, the dispenser
should be located at the upper position, otherwise the milk tube will be jammed.
Recommended cleaning agents – accessories
The following accessories are available:
Milk sludge remover:
●
Urnex
®
Rinza.
Descaling liquid/tablets:
●
Durgol
®
Swiss Espresso,
●
BSH service accessories, No. 00311556.
Cleaning tablets:
●
BSH service accessories, No. 00310575.
Troubleshooting
This section contains important information on localising and eliminating faults.
Please observe the notes to prevent danger and damage.
Pull the mains plug out of the plug socket before beginning with
troubleshooting.
COFFEE MACHINE MESSAGES, POSSIBLE CAUSES AND REMEDIES
Display
Cause
Remedy
●
Water tank is empty.
●
Fill water tank: see
section “FILLING WITH
WATER”.
●
Waste container is full.
●
Empty and clean the
waste container: see
section “EMPTYING THE
WASTE CONTAINER”.
●
Waste container is
missing.
●
Fit waste container.
●
Number of dispensed
coffees prompts cleaning.
●
Run the cleaning
programme: see
section “RUNNING THE
CLEANING PROGRAM”.
●
Number of dispensed
coffee prompts descaling.
●
Run the descaling
programme: see
section “RUNNING
THE DESCALING
PROGRAMME”.
●
Process aborted due to
malfunction or incorrect
operation.
●
Machine goes to normal
standby function.
Summary of Contents for ZCM4821B
Page 43: ...ZCM4821 001_v01 ...
