Zelmer ZFP1100B, User Manual

44

ZFP1100-001_v02

Tips for speed settings

Control knob 

speed setting

Function

Application

1-3

Kneading

Kneading  heavy,  dense  dough,  such  as  yeast  dough,  pasta  dough, 

dumpling dough, etc., and to pre-mix the ingredients.

4-8

Mixing

For mixing cake cream, batter, mashed potatoes, etc.

9-12

Whipping

Whipping egg whites, whipped cream, creams, etc.

It features 12 speed settings and an off position "0".

1

 In order to operate the appliance, turn the knob clockwise 

from "0" (off) to the required speed setting.

  To  avoid  splashing  the  ingredients  out  of  the 

bowl, always start at the lowest speed. When 

the ingredients start to mix, you can increase 

the speed in accordance with the information 

contained in section Tips for speed settings.

  When  finished,  turn  the  speed  control  knob 

to "0" (off) and remove the plug from the wall 

socket.

Using the attachments

WHISK

It is used for whipping egg whites, whipping cream, kneading 

light sponge cakes, etc.

FLAT BEATER

It  is  used  for  preparing  cake  cream,  batter,  mashed 

potatoes, etc.

MIXING HOOK

Is  used  for  kneading  heavy  dough  such  as  yeast  dough, 

pasta dough, dumpling dough, ginger bread dough, etc.

Mixing time

Your  food  mixer  will  mix  faster  and  more  thoroughly 

than  most  traditional  mixers.  Therefore,  mixing  time 

recommended  in  traditional  recipes  should  be  adjusted  in 

order to avoid excessive mixing. For example, some dough 

may  require  only  half  the  time  to  get  mixed,  compared  to 

traditional food mixers.

  Do not operate the appliance continuously for 

more than 10 minutes. Allow the appliance to 

cool down for at least 20 minutes.

INSTALL THE BOWL 

1

 Turn the 

speed control knob

 to "0" (off). Remove the 

plug from the wall outlet.

2

 Lift the 

motor unit rotating head

.

3

 Install the 

bowl

 on the 

base

.

4

 Rotate the 

bowl

 clockwise until it locks.

REMOVE THE BOWL 

1

 Turn the 

speed control knob 

to "0" (off). Remove the 

plug from the wall outlet.

2

 Lift the 

motor unit rotating head

.

3

 Rotate the 

bowl

 counter-clockwise until it unlocks.

4

 Lift the 

bowl

 and remove it from the 

base

.

INSERT THE ATTACHMENTS (WIRE WHISK, 

FLAT BEATER, MIXING HOOK)

1

 Turn the 

speed control knob

 to "0" (off). Remove the 

plug from the wall outlet.

2

 Lift the 

motor unit rotating head

.

3

 Align the notch at the top of the attachment with the pin 

on the rotating head drive shaft.

4

 Push the attachment into the shaft and rotate counter-

clockwise until the shaft pin is fully inserted.

REMOVE THE ATTACHMENTS (WIRE WHISK, 

FLAT BEATER, MIXING HOOK) 

1

 Turn the 

speed control knob

 to "0" (off). Remove the 

plug from the wall outlet.

2

 Lift the 

motor unit rotating head

.

3

 Rotate the attachment clockwise, until when the pin on 

the drive shaft will be aligned with the notch in the whisk/

attachment.

4

 Remove the attachment.

SPEED CONTROL KNOB 

Planetary food mixer is equipped with a speed control knob. 

D

E

F

G

B