Zelmer ZHD16000, User Manual

36

HD1500-001_v04

Safety instructions

This  hair  dryer  is  equipped  with  an  overheating  protection 

device which turns off the appliance when the temperature 

of  the  outflow  air  is  too  hot  or  when  the  air  inlet  is  partly 

blocked. If the hair dryer switches off during operation please 

switch off all buttons and allow to cool. The protection device 

will then automatically reset. Before using check if air inlet 

and outlet is not blocked. If necessary unplug the appliance 

and clean the openings. While using the appliance do not 

block the openings and do not allow hair to get inside the 

hair dryer.

Technical parameters

The technical parameters are indicated on the rating label.

ZELMER hair dryer fulfills the requirements of the existing 

norms. 

The hair dryers are produced in II insulation class, they don’t 
need grounding

.

Noise level: 72 dB/A.

This  device  complies  with  Commission  Regulation  (EC) 

no. 1275/2008 on eco-design requirements.

The appliance is in conformity with the requirements of the 

directives:

–

Electrical  equipment  designed  for  use  within  specific 

voltage limits (LVD) – 2006/95/EC.

–

Electromagnetic compatibility (EMC) – 2004/108/EC.

The appliance was marked by the CE sign on the rating label.

For  CE  marking  declaration  of  conformity  please  visit  the 

manufacturer's website at www.zelmer.com.

Construction of appliance

1

 Air outlet

2

 Air inlet cover

3

 Air inlet

4

 Regulation of air stream strength switch

5

 Temperature regulation switch

6

 Cold blow switch 

7

 Practical handle for hanging

8

 Power supply cord

9

 Air concentrator

10

 Diffuser

Regulation of air stream strength

  0

  –  appliance off

  I

   –  delicate stream of air

  II

  –  strong stream of air

Regulation of temperature

  – low temperature

  – medium temperature

 – high temperature

A

CAUTION!

Not observance can result in 

damage to possessions

●

Never leave working hair dryer unattended Risk of fire.

●

Make  sure  that  input  and  output  holes  are  never 

blocked.

●

Never  place  hair  dryer,  plug  or  supplying  cord  in 

water. Never place the hand hair dryer down in a way, 

in which it could fall to water when working.

●

Do not place and store the appliance in places where it 

can fall to water or be splashed.

●

Never try to remove dust or other objects from inside of 

hair dryer using sharp objects (i.e. comb).

●

Never block the inlet and outlet of air, and do not place 

hair dryer on soft surface such as bed or sofa, where 

the air intake hole can be blocked. The appliance is 

not intended to be used with external time switches or 

separate system of remote control.

●

Keep the supply cord far away from hot surfaces.

●

Before putting hair dryer away allow it to cool down.

●

Do not unplug by pulling the power supply cord but by 

pulling the plug itself.

●

Do not turn the power supply cord around hair dryer 

(risk of cord damaging)

●

Never cover hair dryer as it can lead to accumulation 

of heat inside it.

●

Do not use not recommended caps.

SUGGESTION

Information on the product and 

suggestions for its use

●

Hair dryer should be used exclusively to dry hair.

●

Hair  dryer  is  to  be  used  exclusively  for  domestic 

purposes.

●

If  hair  dryer  is  made  available  to  a  different  person, 

please  provide  the  person  with  this  instruction 

manuals.  As  for  hair  dryers  whose  life  time  has 

expired, they are to be disposed of in accordance with 

valid environment protection regulations according to 

Waste  Management  Statute.  Disposal  of  hair  dryers 

with  domestic  waste  is  not  allowed.  Please  consult 

your local waste management authority.

●

Always unplug hair dryer after use.

●

Use hair dryer according to its intended use only as 

stipulated in the present instruction.

CAUTION: In order to ensure additional protection it 

is recommended to equip electric circuit supplying 

the  bathroom  with  a  residual  current  device  (RCD) 

with a residual current not exceeding 30 mA. In this 

respect a specialized electrician is to be addressed.