Zelmer ZIR06000, User Manual

50

ZIR06000-001_v02

Hints for ironing

1

 Sort out the articles to be ironed according to the type 

of  fabric.  This  will  minimize  the  frequency  of  temperature 

adjustment for different garments.

2

 Test ironing a small area on the backside or inside the 

garment if you are unsure about the type of fabric. Start with 

a low temperature and increase gradually.

3

 Wait for about three minutes before ironing heat sensitive 

fabrics. Temperature adjustment needs certain time to reach 

the required level no matter it is higher or lower.

4

 Delicate fabrics such as silk, wool, velour, etc. are best 

ironed with an ironing cloth to prevent shine marks.

5

 You may need a few times of press to activate the spray, 

burst and vertically burst function.

6

 Read the garment labels and follow the manufacturer’s 

ironing  instructions  which  are  often  shown  by  symbols 

similar to the following:

Temperature settings

●

Acetate

●

Elastics

●

Polyamide

●

Polypropylene

●

Cupro

●

Polyester

●

Proteins

●

Silk

●

Triacetate

●

Viscose

●

Wool

●

Cotton

●

Linen

Technical data

The iron technical parameters are included at the name plate.

Type  IR0600,  IR0610:  220-240V  V,  Power:  2000  W  ÷ 

2400 W. Water tank nominal capacity: 300 ml.

Type IR0620: 220-240V, Power: 2300 W ÷ 2700 W. Water 

tank nominal capacity: 300 ml.

Sole plate – ceramic.

VIB

Type

ZIR06000

IR0600

ZIR06100

IR0610

ZIR06200

IR0620

Features

1

 Spray Nozzle

2

Water Tank Cover

3

Steam Control

4

Spray Button

5

Steam Burst Button

6

 Auto-Off Light (for iron model IR0610, IR0620) 

A

●

Never  direct  the  steam  to  human 

or pets.

●

The iron must not be left unattended 

while  it  is  connected  to  the  supply 

mains.

CAUTION!

Not observance can result in 

damage to possessions

●

Remove any protective films or stickers from the sole 

plate and the cabinet.

●

Unwind and straighten the power cord before usage.

●

Fill the water using included vessel for water.

●

Keep the power cord away from the soleplate.

●

Make  sure  that  the  voltage  on  the  rating  plate 

corresponds to that of your power grid.

●

Always  connect  the  iron  to  a  suitable  mains  supply 

outletm  (AC  only),  with  grounding,  which  voltage 

complies with the voltage indicated on the appliance 

nameplate.

●

Do  not  use  an  extension  power  cord  set  without 

grounding!

●

Do not add perfume, vinegar or other chemical liquids 

into  the  water  tank;  they  can  damage  the  appliance 

seriously.

●

Do  not  immerse  the  appliance  in  water  or  any  other 

liquid.

●

Do not wrap the power cord around the unit for storage 

until it has cooled down completely.

●

Do not attempt to open the cabinet or dismantle any 

parts from the appliance.

●

The appliance is not intended to be operated by means 

of an external timer or separate remote-control system.

●

If you do not use the iron, even for short time, switch it 

off, turning Temperature Dial in anti-clockwise direction 

to 

“MIN”

.

●

If you are not going to use the iron even for a short 

period of time, turn off the steam function by setting the 

steam control to 

 position.

●

Use “SELF CLEANING” function at least once a month.

SUGGESTION

Information on the product and 

suggestions for its use

●

The iron is intended for domestic usage only and you 

can use it solely according to herewith manual.