Zelmer ZPC6015UE, Instruction Manual

38

PC-004_v01

Technical parameters

The technical parameters are indicated on the rating label.
The ceramic hob is a I class appliance equipped with a cord 

having a grounding wire.
The appliance meets the requirements of the applicable 

norms.
The appliance is in conformity with the requirements of the 

directives:

Low voltage appliance (LVD) 

–

– 2006/95/EC.

Electromagnetic compatibility (EMC) 

–

– 2004/108/EC.

The appliance was marked by a CE sign on the rating label.

Appliance features  

( Figure B)

I, II, III, IV – heating zones

1

 Interlock button 

2

 Power adjustment buttons 

, 

3

 TIMER 

, 

4

 Double heating zone button 

5

 ON/OFF button 

Preparing the appliance for operation

After switching on the appliance a single beep will be heard 

and all indicators will light for about 1 second – it means that 

the ceramic hob is in the standby mode.

Operating the hob

1

 Switch on the hob with the 

 button. All indicators will 

show „ ”. 

2

 Place the utensil in the selected heating zone.

3

 Set the desired heating level (1-9) using the 

, 

buttons.

4

 To switch off a given heating zone, set the power level to 

0 using the 

 or 

 buttons.

5

 After operation, switch off the hob with the 

 button.

If the hob is switched on and no heating zone is 

●

operating, the appliance will automatically switch to the 

standby mode after 1 minute. 

Power and size of the individual heating zones

Heating 

zone

ZPC6015UE, ZPC6035BE

ZPC6026UE, ZPC6046BE

Size

[mm]

Max power

[W]

Size

[mm]

Max power

[W]

I

∅ 

200

1800

∅ 

165

1100

270

2000

II

∅ 

165

1200

∅ 

165

1200

III

∅ 

137

1000

∅ 

200

1800

∅ 

223

2200

IV

∅ 

165

1200

∅ 

165

1200

Heat indicator

When using the hob for a longer period of time, the given 

heating zone remains hot for some time after switching the 

appliance off. The symbol „ ” on the power indicator of the 

given heating zone warns against accidental touching of the 

hot hob. 

Overheat protection

The hob is equipped with a built-in sensor, which meas-ures 

the temperature inside the hob. If the permitted temperature 

value is exceeded, the ceramic hob will automatically switch 

off.

Automatic switch off

When the heating zone is switched on without any operation, 

the hob will switch off automatically upon the lapse of 

a default time depending on the set power level. See table 

below:

power level

time

1-3

8 h

4-6

4 h

7-9

2 h

2 x 230 V 2L+2N~

16 A

400V 2N~

16 A

220-240 V~

32 A

green-yellow 

green-yellow 

green-yellow 

grey 

grey 

grey 

blue 

blue 

blue 

brown 

brown 

brown 

black  

black  

black