111
Polski
Magyar
Română
Ру
сск
ий
Česky
Slovenčina
Бълг
арск
и
Ук
раїнськ
а
English
SH1490-005_v05
In a humid place, such as bathroom, do not use the shaver with an AC
power supply.
When using the shaver with an AC power supply, do not use soap or
shaving foam.
The energy stored in the rechargeable battery decreases even while the
shaver is used with an AC power supply. Recharge the shaver once every
three weeks.
USE
If the shaving heads are deformed or damaged, replace them with new
ones (see the “REPLACEMENT OF SHAVING HEADS” section). Otherwise,
the shaving heads may scratch your face.
1
Remove the cap and turn on the shaver by pressing the ON/OFF button.
2
Bring the shaving heads in gentle contact with the skin at the right angle, stretch the
skin and move the shaver gently upwards against the grain.
●
While shaving, take care not to push the
shaving heads too strongly against the
skin. Otherwise, the shaving heads will
wear at a higher rate and become dull.
●
To shave delicate parts like the chin,
pull up the slack of the skin by hand,
and stroke upwards. When shaving the
throat, lift the face upwards to thrust the
throat out to pull the slack upwards.
3
To use the trimming blade, slide the
trimming blade button downwards. The
trimming blade vibrates correspondingly with
the inner blade.
4
To cut sideburns, apply the trimming blade to the skin lightly at a right angle, and move
the shaver gently downwards.
5
After use, turn off and clean the shaver (see the “
Cleaning and maintenance
”
section). Be sure to put on the cap
(1)
after cleaning.
Even if the charging indicator indicates that the shaver is empty and the
shaver stops vibrating, never leave it with the power switch turned on.
