PROBLEM
PROBABLE CAUSES
SOLUTIONS
The device does
not filter.
The lid of the water intake tank is
not properly closed.
•
The water level of the reservoir
admission is below the minimum
level, the replace water symbol
flashes.
•
The water intake tank is not
not in place.
Properly put the lid of the
water intake tank back in place.
•
Fill the tank.
•
Put the water intake tank back
in place.
Abnormal noise
when filtering.
The water level of the intake tank
is below the minimum level.
•
The presence of air in the water
system.
•
Inadequate water quality,
non-functional reverse osmosis or
coal filter.
Fill the tank.
•
Open, then repeatedly close
the lid of the water intake tank,
so that air escapes from the
water circuit.
•
Replace the coal filter or
the reverse osmosis filter.
Waterleak.
The receptacle is full.
•
The presence of a foreign object
in the one-way valve of the tank
support base.
•
Presence of a foreign object in the
seal of the tank.
•
Internal water leak.
Empty the receptacle.
•
Clean the one-way valve.
•
Clean the seal.
•
Turn off and purge the device.
Contact customer service.
44
Summary of Contents for OSMOSEUR ORIGINE
Page 1: ...1 M A N U E L D U T I L I S AT I O N U S E R G U I D E...
Page 15: ...17...
Page 37: ...39...
