6. FILL TANK WITH EPSOM SALT
1. Install Inline Carbon Water Filter to the hose you are using to fill your tent.
p
NOTE:
To make sure no carbon from your filter enters your tank, run about 5 gallons of
water through the filter into a drain, or until water runs clear.
2. After adding 2 to 3 inches (5 to 7.5 cm) of water, start smoothing out creases on
the tub floor. Once smooth, continue to fill the tank with 5 inches (13cm) of water.
Add 100 lbs (45 kg) of salt at a time, mixing in fully as you go.
NOTE:
If you bought your salt from zen float co., we provide 800 lbs (363 kg) of salt
per pallet and you will need all of it for the first fill of your tent.
3. Agitate water and salt by stirring and mixing. It may be easiest to stand in the
water and mix it around with your feet.
15
