1 of 3 March 2019 / RevA
Z-E3756 Update Instructions MainSystem
Requirements
The update consists of a complete MainSystem software update, which must be run from USB data carrier. You will need:
> USB removable storage device (USB stick) with at least 2 GB storage capacity.
> A PC or notebook with Windows operating system.
Please note: Before you start, the USB stick must be formatted with FAT 32. (Right-click on USB memory device in Windows
Explorer. Select "Format" > FAT 32 > Start.
(!) The ZENEC Z-E3756 restarts several times during the software update and stays off, among other things, for a few
seconds (black screen for approx. 10 ~ 15 sec.) before the device restarts. Please do not operate or switch off the device
during the update process.
Installation of the MainSystem software update via USB:
The MainSystem software can be found at:
www.zenec.com> Support> Software Updates> FIAT> Z-E3756
Link:
http://www.zenec.com/support/software-updates/z-e3756/?lang=en
1. Download the Software Update
“v1.7.7 "Z-E37567_FEU_v1.7.7.exe"
.
2. The software package is a self-unzipping executable. Start extraction with a double-click and select your USB stick as target
for the uncompressed fi les.
3. You obtain two fi les called „ swupdate_6529B_20190305 and ZENBOOTL2180817.con” in the root directory of the USB stick
4. Connect the USB stick to the Z-E3756 USB connection cable.
5. Go to the device menu:
Settings > System > Software Update
and confi rm by tapping on the
green hook checkbox
.
Tap on the
green hook checkbox
again, in the "Software Update?" pop-up window.
