P a g e
|
2
2)
Access the Car Setup Menu as Highlighted to setup the reverse camera and vehicle settings.
`
In Car Setup you can program the Zenec for reverse
camera and other important settings
Park Assist
–
This is where you program the Zenec
for reverse camera
`
Reverse Audio Assist
–
Here you can program what will
happen to the audio when Reverse is engaged
Driver Position
–
Please make sure that this setting is
changed to Right Hand Drive
3)
Access the Bluetooth Setup Menu as Highlighted in the below Screen Shot
1.
Microphone
–
Choose External or Internal*
2.
Display Order
–
Change this setting to First Name
so that the BT Contacts will be display by First
Name
3.
Device Name
–
This allows the End User to change
the BT Broadcast name so they can easily identify
the BT device they are connected too.
*We strongly advise installing an external microphone
for optimum voice quality
4)
Access the TFT Settings Menu
`
TFT Settings
–
This menu allows you to change the
device brightness settings and controlled how the
device is dimmed for low light or night mode.
TFT Control
–
We recommend changing this setting to
Car which will adjust the brightness when the cars lights
are turned on. Navi will adjust the brightness by the
current GPS Location.
