background image

4 Rev.B   

5 Rev.B

TURN ON / OFF

Manual On / Off Z-N528

Press the power button (fig. S/7 

), to turn the ZENEC system on, press and hold the power 

button to switch off the device.

  

  

NOTE

Use of the multifunction steering wheel and other vehicle functions will require a vehicle-specific 

CAN/Stalk interface. Further information may be obtained from an authorized ZENEC dealer.

The ZENEC system is equipped with an anti-theft protection function. If this is active, on restarting 

the ZENEC system after interruption of the power supply you will be asked to enter your password. 

To change the password:

Device User Manual → Setup → Device Setup → Password

Z-E3726 

GERÄTEBEDIENUNG – Z-E3726

GRUNDSÄTZLICHE BEDIENUNG 

EIN-/AUSSCHALTEN

Manuelle Ein-/Ausschaltung 

Drehregler links gedrückt halten, bis sich das ZENEC-System ein- oder ausschaltet 
(Abb. S/01 

Automatische Ein-/Ausschaltung 

Fahrzeuge mit CAN-Bus Anbindung: Bei Einschalten der Zündung wird das ZENEC-System
aktiviert. Der Bootvorgang kann max. 1,5 Minuten in Anspruch nehmen. Dies kann zur Folge
haben, dass das System nur mit Verzögerung einsatzbereit ist. Das Ausschalten des ZENEC- 
Systems wird durch das Ausschalten der Zündung oder Abziehen des Zündschlüssels aktiviert.

  HINWEIS

Für eine Nutzung des Multifunktionslenkrads sowie weiterer Fahrzeugfunktionen wird ein 

fahrzeugspezifisches CAN/Stalk Interface benötigt. Weitere Informationen erhalten Sie bei einem 

autorisierten ZENEC-Fachhändler.

DIEBSTAHLSICHERUNG 

Das ZENEC-System ist mit einer Diebstahlschutzfunktion ausgestattet. Ist diese aktiv, werden Sie nach 
Trennung der Stromversorgung bei erneutem Einschalten des ZENEC-Systems aufgefordert, das von 
Ihnen hinterlegte Password einzugeben.  

Um das Passwort zu ändern: 

Bedienungsanleitung 

 Einstellungen 

 Geräte Konfiguration 

 Help 

 Passwort 

HINWEIS 

Bewahren Sie das 

Passwort sorgfältig auf. 

Bei einem Verlust des 

Passworts muss das 

ZENEC-System ausgebaut 

und zur Freischaltung des 

Diebstahlschutzes an den 

ZENEC-

S

ervice 

eingesendet werden. 

Dieser Dienst ist 
kostenpflichtig!

ANTI-THEFT PROTECTION

  

NOTE

Keep your password safe. If the password is 

lost the ZENEC system must be uninstalled, 

and sent back in to ZENEC Service to 

unblock the anti-theft protection. This service 

is not free!

Automatic On / Off

Vehicles without CAN bus: 
The device automatically switches on/off by ignition signal.

Vehicles with CAN/Stalk interface: 

Switching on the ignition will activate the ZENEC system. The boot process can take up to 1.5 

minutes. This may result in some delay until the system is ready. The ZENEC system is shut down by 

switching off the ignition, or removing the ignition key.  

SAFETY INSTRUCTIONS

  

CAUTION

If the driver of the vehicle is distracted, this may lead to an accident or injury. Operating the 

ZENEC system can distract attention from the general traffic situation! Equally, connecting, 

changing or inserting data media can distract the driver from the general traffic situation.

  

CAUTION

Always choose loudspeaker settings such that acoustic signals coming from outside can always 

be heard in the vehicle (e.g. signal horns or sirens).

  

CAUTION

Incorrect installation or commissioning of the ZENEC system may cause damage to the ZENEC 

system or to the vehicle electronics. Only let qualified specialists authorized by ZENEC install the 

device.

  

CAUTION

This ZENEC system is intended solely for operation at an on-board voltage of 12 V DC. Operating 

the ZENEC system at any other voltage can cause damage to the ZENEC system or to the vehicle 

electrical system.

  

CAUTION

Taking apart or modifying the ZENEC system can result in damage to the device or the vehicle. 

Opening the device or modification by a person not authorized by ZENEC will render warranty 

claims null and void.
In the event of a malfunction or defect please contact an authorized ZENEC dealer. Unauthorized 

repairs will render warranty claims null and void.

  

CAUTION

The connection and charging leads of external mobile devices can get in the way of the driver. 

Please run these so that the driver's freedom of movement is not hindered.

See detailed information at page 65

Summary of Contents for Z-N528







































Reviews: