35
35
3.4 Editing the route
Tap the following buttons:
,
,
.
The list of route points appear with the start point at the top of the list and the final destination at the
bottom. If several via points exist, you might need to scroll between pages.
Tap one of the route points in the list. You have the following options:
Button
Action
The selected point moves up in the list (becomes a via point to be reached earlier). Tap
this button repeatedly, and the point becomes the start point of the route.
The selected point moves down in the list (becomes a via point to be reached later). Tap
this button repeatedly, and the point becomes the final destination of the route.
The route is reversed. The start point becomes the destination, the destination becomes
the start point, and all via points are to be reached in the opposite order than before.
The route is optimised. The start point and the destination remain at their position, but
the via points are reordered to make the shortest possible route.
The selected point is removed from the route.
As soon as you leave this screen, the route is recalculated automatically, and you can start navigating
right away.
3.5 Watching the simulation of the route
The procedure is explained starting from the Map screen.
1. Tap the following buttons:
,
.
2. The Route menu appears.
3. Tap
to run the simulation at normal speed and with voice guidance instructions
announced.
4. The simulation can be aborted any time by tapping
.
3.6 Pausing the active route
You do not need to pause the active route: when you start driving again, ZENEC Navigation Software
restarts the voice instructions from your position.
