3.12 Time, Alarm, Remote Start Timer Set Button
Ⅱ
4 sec
The time, alarm, and remote start timer can be set by holding down Button
I
for 4
seconds. The following buttons are used.
Button
Ⅰ
: Time Menu (Time
→
Alarm
→
Remote Start Timer)
Press and hold Button
Ⅱ
for 4 seconds. Once the time starts to blink,
toggle to Alarm and Remote Start Time and back to Time by pressing
Button
I
for 0.5 second at a time.
Button
Ⅱ
: Hours setting.
Press and/or hold Button
II
in order to increase the hours value.
Button
Ⅲ
: Minutes setting.
Press and/or hold Button
III
in order to increase the minutes value.
Button
Ⅳ
: Confirmation or rejection.
Press and hold Button
IV
for 2 seconds in order to accept the desired time
or press for 0.5 second in order to reject the set time.
NOTE
: If a button is not pressed within 20 seconds of another press,
programming mode will be exited.
1. Time - Clock Feature Displaying Current Time
a. Press and hold Button
Ⅱ
for 4 seconds. The time
will begin to blink.
b. Press
Button
Ⅱ
and Button
Ⅲ
in order to adjust
the hours and minutes.
c. Press and hold Button
Ⅳ
for 2 seconds in order to
confirm the set time.
2. Alarm - Alarm Clock Feature
a. Press and hold Button
Ⅱ
for 4 seconds. The time
will begin to blink.
b. Press
Button
I
for 0.5 second to toggle to Alarm
setting.
c. Press
Button
Ⅱ
and Button
Ⅲ
in order to adjust
the hours and minutes.
d. Press and hold Button
Ⅳ
for 2 seconds in order to confirm the set time.
e. The
icon will appear.
3. Remote Start Timer Set - Remote Start will occur at the specified time if all
constraints on remote start are met. Remote Start will occur each day at the
specified time until the feature is turned OFF.
a. Press and hold Button
Ⅱ
for 4 seconds. The time
will begin to blink.
b. Press
Button
I
twice for 0.5 second each to toggle
to Remote Start Timer setting.
c. Press
Button
Ⅱ
and Button
Ⅲ
in order to adjust
the hours and minutes.
d. Press and hold Button
Ⅳ
for 2 seconds in order to confirm the set time.
e. The
icon will appear.
22
