background image

 

3.5   Ignition Lock

 

Buttons

  4 sec 

To activate or deactivate this function, the Brake Pedal must be held down at the  
same time while Buttons I + IV are pressed for 4 seconds.  Ignition lock will lock the 
doors when the foot brake is pressed after the key is put into key cylinder and turned  
to the ON position.  If a door is opened while the key is in the ON position, the doors  
will lock again once the door is closed and the foot brake is pressed again. 

 

Ignition Lock ON 

 

 

Ignition Lock OFF 

 

 
 

3.6  Cold Start Timer Buttons

  4 sec 

 
To activate or deactivate this function, the Brake Pedal must be held down at the  
same time while Buttons II+ IV are pressed for 4 seconds.  Once Cold Start Timer I 
s turned ON, the vehicle will remote start automatically every 1, 2, or 3 hour(s) as  
specified by the User Programmable Options.  If the vehicle is driven or remote start  
is turned ON, the timer will automatically restart once the engine is turned OFF.   
The timer can be set through the User Programmable Options. 
 
Cold start timer ON 

 

Cold start timer OFF 

 

 
 

 
 
 
 

Remote Control 

&

will blink.

will 

stay ON. 

Vehicle 

1 parking light flash & 1 siren chirp  

Remote 

Control 

&

will blink.

will turn 

OFF. 

Vehicle 

2 parking light flashes & 2 siren chirps  

Remote Control 

&

will blink.

will stay ON. 

Vehicle 

1 parking light flash & 1 siren chirp  

Remote Control 

&

 will blink.

will turn 

OFF. 

Vehicle 

2 parking light flashes & 2 siren chirps  

18 

Summary of Contents for ZN-502 S





























Reviews: