8
(standard accessory). After replenishing the grease, install the crank cover securely.
ATTENTION
Do not apply much force to the crank case. It is made of plastic and may break.
CAUTION
When using the drill follow these rules:
• continuous use of the drill should not exceed 15 minutes;
• do not allow mechanic damage (strikes, falls etc.);
• protect the drill from external sources of heat and chemically active substances, as
well as liquid and objects penetration;
• provide effective cooling and drilling wastes withdrawal from the tool working zone;
• before disconnecting the tool from the power source turn off the On/Off switch;
• check the engine temperature, do not allow overheating;
• change the rotation direction only after switching off the tool and complete stop of
rotating parts;
• do not use bits not intended for concrete and brick drilling in impact mode.
Inobservance of these rules will make warranty void!
WARNING! Repair, modification and check of ZENIT power tools should be
performed only in authorized service centers ZENIT. While use or maintenance of
power tools follow all safety rules and standards.
NOTE
Zenit Power Tools are constantly being improved and modified to incorporate the
latest technological advancements. Accordingly, some parts may be changed without
prior notice.
Summary of Contents for Semi-Profi Series
Page 1: ...Instruction manual Rotary hammer RH 1600 2 profi SEMI PROFI SERIES...
Page 2: ......
Page 9: ...9...