Before Calling Service Personnel (Cont’d)
59
Reference
Symptom
No sound.
The playback
picture is poor.
The DVD player does
not start playback.
Cause
• The equipment connected with the audio
cable is not set to receive DVD signal output.
• The audio cables are not connected
securely.
• The power of the equipment connected
with the audio cable is turned off.
• The Digital Audio Output is set to the
wrong position.
• The disc is dirty.
• No disc is inserted.
• An unplayable disc is inserted.
• The disc is placed upside down.
• The disc is not placed within the guide.
• A menu is on the TV screen.
• The Rating level is set.
Correction
• Select the correct input mode of the audio
receiver so you can listen to the sound
from the DVD player.
• Connect the audio cable into the jacks
securely.
• Turn on the equipment connected with the
audio cable.
• Set the Digital Audio Output to the
correct position, then turn on the DVD
player again.
• Clean the disc.
• Insert a disc. (Check that the disc
indicator in the display window is lit.)
• Insert a playable disc. (Check the disc
type, color system and Regional code.)
• Place the disc with the playback side down.
• Place the disc on the disc tray correctly
inside the guide.
• Press the SETUP button to turn off the
menu screen.
• Cancel the Rating function or change the
rating level.
