12
Presetting the radio stations
11
Press TUNER/BAND until the FM or AM appears
in the display window.
2
2
And then every time you press TUNER/BAND,
FM and AM changes alternately.
3
3
Press TUNING
/
on the front
panel until the frequency indication starts to
change, then release.
Scanning stops when the unit tunes in a
station.
4
4
Press PROG./MEMO (or PROGRAM on the
remote control).
A preset number will flash in the display window.
5
5
Press PRESET (
/
) (or PRESET (
) on
the remote control) to select the preset number
you want.
6
6
Press PROG./MEMO (or PROGRAM on the
remote control) again.
-
The station is stored.
77
Repeat steps 3 to 6 to store other stations.
To tune in a station with a weak signal
Turn
MULTI JOG SHUTTLE
in step 3 to tune in the sta-
tion manually.
To clear all the memorized stations
Press and hold
PROG./MEMO
on the front panel for
about two seconds, “CLEAR” appears in the display
window and then press
CLEAR
again, the stations are
cleared.
For your reference
If all stations have already been entered, FULL message
will appear in the display window for a moment and then
a preset number will flash. To change the preset number,
follow the steps 5-6 on the left side.
To recall presets
Press and hold
PRESET (
/
)
( or
PRESET (
)
on the remote control) until the desired preset number
appears or press it repeatedly.
Tuning in automatically
Press
TUNING /
for more than 0.5
seconds.
Tuning in manually
Press
TUNING /
briefly and repeatedly.
Turn
MULTI JOG SHUTTLE.
You can preset 30 stations for FM and AM. Before tuning, make sure that you have turned down the volume to the
minimum.
X
TAPE-1
APE-1
D. SKIP
D. SKIP
TAPE-2
APE-2
TAPE-1
D. SKIP
TAPE-2
TUNER/
BAND
MULTI JOG
SHUTTLE
TUNING /
PROGRAM
TUNER/
BAND
STOP(
)/ CLEAR
PRESET (
/
)
PRESET (
)
PROG./MEMO
