Page 47
Installer menu items can be
accessed by using the remote
control. Just press and hold
MENU (about 8 seconds) until
the menu disappears. Key in 9,
8, 7, 6, then ENTER. To remove
the Installer’s Menu, press
ENTER. Any changes you make
will be stored in nonvolatile
memory.
The Installer menu opens with
item 000 Installer Seq. Use
Up/Down arrows to sequence
through the installer menu. Use
Up/Down arrows to scroll items
in the menus. To change a set-
ting use the Left/Right ADJ
keys. Press ENTER to remove
menu.
Using the Installer Menu
Items 000 - 103 are accessible
only in the Installer Menu. Their
numbers, descriptions, ranges,
factory default settings, and a
place for listing any changes
made on site are given below
and on the following pages. To
direct enter an item, key in its
number and press Menu.
The Factory Menu that is intend-
ed for qualified service techni-
cians only, is not shown. 8-F
Menu Items (not shown here)
are service type adjustments and
only qualified technicians hav-
ing specialized test equipment
should access them.
Typical Installer Menu
Menu Function
Value
Default
Brief Description of Function and Comments
Item
Range
Value
0-I. INSTALLER SEQ
0 - 3
0
Leave default set at 0.
1-I. POWER MANAGE
0 - 7
0
Sets number of hours of no activity before auto shutoff.
2-I. AC ON
0 / 1
0
Set to 1 to enable auto turn on at power up.
3-I. BAND-AFC
0 - 7
0
Sets Tuning band.
4-I.
STRT CHANNEL
0 - 255
255
Channel at turn-on (255 for last Channel). For digital
channels, use with item 101-I Start Minor Channel.
5-I. CHAN LOCK
0 / 1
0
When set to 1, cannot tune from current channel.
6-I.
GHOST CH
0 / 1
0
Set to 1 to enable Ghost Channel display.
7-I.
START VOLUME
0-63, 255
255
Volume level at TV turn-on (Set 255 to retain last level).
8-I.
MIN VOLUME
0 - 63
0
Minimum volume setting.
9-I.
MAX VOLUME
0 - 63
63
Maximum volume setting.
10-I. MUTE DISABLE
0 / 1
0
Set to 1 to disable Mute function.
11-I. KEY DEFEAT
0/ 1
1
Set to 1 to disable the front panel keyboard MENU,
SELECT and ADJUST keys.
12-I. NOT
USED
13-I. NOT USED
14-I. NOT
USED
15-I. SLEEP TIMER
0 / 1
1
Set to 1 to enable Sleep Timer.
16-I. EN TIMER
0 / 1
1
Set to 1 to enable Timer.
17-I. ALARM
0 / 1
1
Set to 1 to enable Alarm.
18-I. NOT USED
19-I. NOT USED
20-I. FEATURE LEVEL
0 / 1
1
Zen 1 Leave default set 1 (1 Zen1).
21-I. V-CHIP
0 / 1
1
Set to 1 to enable V-Chip (Parental Control).
22-I. MAX BLK HRS
0 - 99
12
Sets number of Parental Control blocking hours.
23-I. CAPTION LOCK
0 / 1
0
Set to 1 to retain caption setting at turn Off.
24-I. TEXT MODE
0 / 1
1
Set to 1 to add Text option to Closed Caption menu.
Installer Menu
Use the Installer Menu to set up or change operational settings.
See detailed descriptions of the Installer Menu items on the following pages
000 INSTALLER
SEQ
000
D2 < - > MICRO COMM STATUS OK
MICRO: V1.00 DA: V2.09
