Setup Checklist
Following are the steps necessary to install and set up the TV
Setup and Operation Checklist
1. Unpack the TV and all accessories.
2. Connect the TV to antenna and all
external video source equipment.
See pages 15 - 23.
3. Install batteries in remote control.
4. Plug TV and source equipment into
standard 120V 60Hz power outlets.
5. Turn TV On.
See pages 24 - 25.
6. Choose on screen menu language.
(English is default.)
See page 39.
Reception Setup and Channel Search
8. Use Auto Prg.* (Program) to search
for all channels in your area.
See page 26.
7. Select viewing source for TV.
See page 28.
8. Adjust Installer menu items per
requirements.
See pages 47 through 55.
Customize the TVs Features for the
End User
9. Fine-tune source image and sound to
personal preference or as required by
source.
See pages 40 through 42.
Additional Features Setup
See page 5, Table of Contents.
• To connect a PC computer to the TV
see the following pages.
See page 7.
• Program remote to operate other
devices. If necessary, program the
remote control to operate the other
devices in your system.
See page 60.
• Create a Master TV and clone the
setup, copy setup to identical TVs.
See pages 5 and 56 - 59.
*Auto Prg. (Program) finds channels
which have a signal present and are
actively being broadcast. Some broad-
casters do not provide or broadcast a
signal continuously. As a result, some
DTV channels may not be found in the
channel scan. If you know that there is
a DTV channel that was not found by
Auto Program, run Auto Program again;
when the DTV channel is actually send-
ing out a program signal.
Page 6
Back of
Remote
