Page 14 of 28
802253NZ - HT BC Residential Instructions 10.18 v3.00
Section 3
Booster Heater
Mount base
Horizontally
3.1
Product Description
The boost unit is a compact electronically
controlled auxiliary water heater. It is intended to
provide pre heating of water before it enters the
Zenith HydroTap G4 boiling tank. The Booster is
supplied as standard equipment with all 4-In-1
& BCHA-AV models. However, it may be later
installed as an accessory to increase boiling water
delivery.
280mm
Booster Specifications:
Rating
Unit
Nominal Power Rating
2.2
kW
Nominal Current
10
A
Electric Supply 50Hz AC
230
V
Elect flex and plug - 1 meter length (with 90º Australian plug)
10
A
Fixed Flow Rate
1.2
L/min
Minimum water pressure
200
kPa
Note 1:
water connection
Blue marking - water in
Red marking - water out.
The braided hoses cannot be
lengthened.
Note 2:
The electrical cable
length is 1.0 metre.
Note 3:
Position the Booster
within reach of the fixed hose
lengths, keeping the Booster
as close as possible to the
undersink unit inlet/ outlet
fittings.
Note 4:
Ensure the Booster
heater is mounted in an up-
right position (as shown) with
a horizontal base
