26
CONVERGENCE
Red Alig nment
Yello w Cro ss-h atch
Blue A lig nment
M agen ta Cross-h atch
4. Press the
CURSOR KEYS
at the selected
adjustment point to match the
GREEN
horizontal
and vertical lines to the Screen Jig lines.
Red 13X9 Mode Alignment
5. Press the
0
key to select the
RED + GREEN
internal cross-hatch signals.
6. Repeat steps 3 and 4 for the
Red 13X9
mode
adjustments.
Blue 13X9 Mode Alignment
7. Press the
SOURCE
key to select the
BLUE +
GREEN
colors.
8. Repeat steps 3 and 4 for the
Blue 13X9
mode
adjustment.
9. In order to Save settings (
WRITE to ROM
), press
the
MOVE
key 2 times. When the data is stored
Green dot will appear on the screen. Hit
MOVE
to continue.
When complete, press the service mode button
SKO1
to exit the Convergence setup mode.
