9
IFU-001 Rev. 8
7
O
PERATING
I
NSTRUCTIONS
F
OR
P
ATIENTS
Before use, please read Section
16, “Contraindications” and Section
17
, “
General
Precautions and Warnings”
Connect the power supply to the Therm-X main unit and an AC outlet. When the unit initiates, it will
beep briefly and the Therm-X logo will briefly appear followed by the Home Screen.
The Therm-X will come pre-programmed by your
healthcare provider with a custom cycle for use. To
initiate the pre-programmed therapy, follow all
instructions in the 'Preparing your Therm-X for Use',
including unpacking the machine, filling the coolant
tank, and attaching the hose and garment. Then
select the “Start Treatment” button from the Home
screen.
Once the cycle has been initiated you will feel the garment inflate and fluid flow. The 'Treatment
Running' screen will appear and will show the current cycle settings, a progress bar, timer, and 'Stop'
and 'Pause' buttons. The unit will run through the end of the prescribed cycle automatically.
You may stop the cycle and return to the 'Home'
screen at any time by selecting the “Stop”
button.
You may pause the cycle at any time by selecting
the 'Pause' button, and resume the cycle by
again pressing the 'Resume' button.
You may adjust the temperature or
compression level of the treatment cycle during
a running treatment by selecting the
'Compression' or
‘Temperature’ symbol
.
To change the compression level, select the
'Compression' symbol then select one of the
available compression levels. You may adjust the
'Compression' level as many times as needed during
a cycle.
Note: compression levels may only be changed
to a compression level equal to or lower than the
programmed treatment.
Summary of Contents for Therm-X Series
