background image

-3-

1.

Read Instructions
All the safety and operating instructions should
be read before the product is operated. 

2.

Follow Instructions
All operating and use instructions should be
followed.

3.

Retain Instructions
The safety and operating instructions should be
retained for future reference.

4.

Heed Warnings
All warnings on the product and in the operating
instructions should be adhered to.

5.

Cleaning
Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.

6.

Water and Moisture
Do not use this product near water — for exam-
ple, near a bath tub, washbowl, kitchen sink, or
laundry tub, in a wet basement, or near a swim-
ming pool.

7.

Accessories
Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may
fall, causing serious injury to a child or adult,
and serious damage to the product. Use only with
a cart, stand, tripod, bracket, or table recom-
mended by the manufacturer or sold with the
product. Any mounting of the product should fol-
low the manufacturer’s instructions, and should
use a mounting accessory recommended by the
manufacturer.

8.

Transporting Product

A product and cart combination

should be moved with care.
Quick stops, excessive force,
and uneven surfaces may cause
the product and cart combina-
tion to overturn.

9.

Attachments
Do not use attachments not recommended by the
product manufacturer as they may cause hazards.

10. Ventilation

Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from overheating,
and these openings must not be blocked or cov-
ered. The openings should never be blocked by 
placing the product on a bed, sofa, rug, or other 

similar surface. This product should not be
placed in a built-in installation such as a book-
case or rack unless proper ventilation is provided
or the manufacturer’s instructions have been
adhered to.

11.

Power Sources
This product should be operated only from the
type of power source indicated on the marking
label. If you are not sure of the type of power
supply to your home, consult your product dealer
or local power company. For products intended
to operate from battery power, or other sources,
refer to the operating instructions.

12. Line-Cord Polarization

This product is equipped with a polarized alter-
nating-current line plug (a plug having one blade
wider than the other). This plug will fit into the
power outlet only one way. This is a safety fea-
ture. If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.

13. Power-Cord Protection

Power-supply cords should be routed so that they
are not likely to be walked on or pinched by
items placed upon or against them, paying partic-
ular attention to cords at plugs, convenience
receptacles, and the point where they exit from
the product.

14. Outdoor Antenna Grounding 

If an outside antenna or cable system is connect-
ed to the product, be sure the antenna or cable
system is grounded so as to provide some protec-
tion against voltage surges and built-up static
charges. Article 810 of the National Electrical
Code (U.S.A), ANSI/NFPA 70 provides informa-
tion with regard to proper grounding of the mast
and supporting structure, grounding of the lead-
in wire to an antenna discharge unit, size of
grounding conductors, location of antenna-dis-
charge unit, connection to grounding electrodes,
and requirements for the grounding electrode.
See figure on next page.

15. Lightning 

For added protection for this product (receiver)
during a lightning storm, or when it is left unat-
tended and unused for long periods of time,
unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent dam-
age to the product due to lightning and power-
line surges.

IMPORTANT SAFETY INSTRUCTIONS

Your product has been manufactured and tested with your safety in mind. However, improper use can result in
potential electrical shock or fire hazards. To avoid defeating the safeguards that have been built into your new prod-
uct, please read and observe the following safety points when installing and using your new product, and save them
for future reference.

Observing the simple precautions discussed in this section can help you get many years of enjoyment and safe oper-
ation from your new product.

PORTABLE CART WARNING

Summary of Contents for VCP352

















Reviews: