Zenith VCP353, User Manual

-10-

REW (Rewind/Reverse Search)
Button
Press while the VCP is in Stop mode
to rewind the tape (no picture, no
sound). During tape playback, press to
begin Reverse Search; The picture
portion of the tape is played in the
reverse direction at high speed (sound
is muted). Press and hold down REW
to rewind the tape at Jet Search speed,
release for normal playback. Press
STOP to end rewind or search.

PLAY
Begins tape playback. The correct
playback speed is automatically select-
ed.

F FWD (Fast Forward/Forward
Search)
Press while the VCP is in the Stop
mode to fast forward the tape (no pic-
ture or sound). During tape playback,
press to begin Forward search; The

picture portion of the tape is played at
high speed (the sound is muted). Press
and hold down F FWD to play the
tape at Jet Search speed, release for
normal playback. Press STOP to end
fast forward or search.

Cassette Loading Compartment
Insert a VHS video cassette into the
video cassette compartment until it is
automatically drawn into the VCP. The
cassette can be inserted even when
power is off. Power turns on automati-
cally and playback begins.

CAUTION; DO NOT attempt to
insert a cassette into the compartment
when the power cord is unplugged.

CAUTION; DO NOT insert fingers
into the cassette compartment.

12

11

10

9

OPERATION 

(continued)

Playing a Video Cassette

•

Turn on the TV.

•

If the VCP is connected to the TV via
the RF OUT jack, tune the TV to the
same channel (3 or 4) as the Channel
3/4 switch on the back of the VCP.

•

If the connection in mode via the VCP's
Audio/Video Out jacks, your TV must
be set to receive audio and video from
an auxiliary source. (Refer to your TV
operating instructions.)

•

To view a VHS cassette tape, insert it
into the cassette compartment. The
VCP will automatically turn on, play
the tape to its end, rewind the tape,
eject the tape, and shut off. If neces-
sary, use the TRK (TRACKING) con-
trol to adjust for the best picture.

Normal TV Viewing

To watch TV, simply turn off the VCP. If the
TV antenna or cable-TV line has been con-
nected to the VCP as shown in this manual,

its signal will pass through the turned-off
VCP unaffected, as if connected directly to
the TV.