-6-
Channel 3/4 Switch
Output video channel switch.
Ant In Jack
Input from external antenna or cable-
TV Line.
Video Out Jack
Video output must be used in conjunc-
tion with audio out connection.
Audio Out Jack
Audio output must be used in conjunc-
tion with video out connection.
DC Input Jack
Input from optional DC power source.
RF Out Jack
Output to television.
6
5
4
3
2
1
HOOK-UP
Refer to the following steps to hook up your Video Cassette Player easily and quickly.
Step 1: Identify the Connectors and Switches
Locate the following connectors and switch on the back of your VCP;
Your VCP has been designed to transmit a
signal to channel 3 or 4 of your TV, TO get
the proper TV signal, set the Channel 3/4
switch on the back of the VCP to the chan-
nel that provides the best picture.
When playing a tape, the TV
must be tuned to the same chan-
nel (3 or 4) as the Channel 3/4
switch on the VCP.
Note: This only applies when the RF OUT
connection is used. If the VCP is connected
to your TV via the Audio/Video output jacks
also, choose appropriate input source at the
TV, (TV Channel 3/4 or Audio/Video In.)
Note: Use of the Audio/Video Output jacks is
optional. Depending on the capability of your
TV, you may get improved picture quality when
using these connections.
4
3
CHANNEL
ANT.IN
RF.OUT
VHF/UHF
VIDEO
AUDIO
OUT
DC I N 1 2V
1
2
3
4
5
6
Step 2: Select the Output Video Channel
CHANNEL
3
4
Summary of Contents for VCP353
Page 1: ...machine numbers VCP353 thanks for choosing zenith...
Page 14: ...NOTE 14...