20
Slow Motion
1. While in still mode, press FORWARD (
M
). The
tape is played at a speed 1/19 times slower than
the normal speed.
2. Use CH/TRK (
v
/
V
) on the Remote Control if
necessary to adjust the tracking.
3. To return to the normal speed, press
PLAY (
N
).
Notes:
•
During slow motion, audio is muted and horizontal
lines (noise bars) may appear on the TV
screen.This is normal.
•
After 3 minutes in SLOW MOTION mode the
DVD+VCR goes back to PLAY mode to protect
the tape and video heads.
CM SKIP (Commercial Skip)
This feature is useful for skipping commercials or
short program segments.
1. Press CM SKIP in playback mode.
The DVD+VCR performs a fast forward picture
search through 30 seconds of recording.
2. Press CM SKIP again to extend the search time
by an addition 30 seconds. The maximum search
time is 3 minutes.
3. When the search is complete, the DVD+VCR
goes into playback mode automatically.
VHS Hi-Fi Stereo/
VHS Hi-Fi Stereo/
MTS Broadcast
MTS Broadcast
This DVD+VCR is equipped with the VHS Hi-Fi audio
sound system for recording and playback. The infor-
mation below gives a brief description of Hi-Fi audio
and how to record and play a tape in the Hi-Fi audio
mode.
Hi-Fi Stereo Audio Sound
A stereo TV with AUDIO/VIDEO input jacks or a
stereo audio system is required for true stereo play-
back. To experience the full and rich stereo sound
available with Hi-Fi recorded tapes, we recommend
the connection of this unit to a home stereo audio
system.
1. Set the AUDIO MODE option to HI-FI on the VCR
SETUP menu .
2. Set the AUDIO OUTPUT option to STEREO so
that the left channel sound (L) is heard from the
left speaker and the right channel sound (R) is
heard from the right speaker.
The other options are (LEFT) POSITION, which
results in the left channel sound (L) being heard
from both speakers or (RIGHT) POSITION, which
results in the right channel sound (R) being heard
from both speakers.
3. Insert a cassette and press PLAY (
N
).
MTS (Multi-Channel TV Sound)
This DVD+VCR can decode MTS stereo and bilingual
(SAP) off-the-air broadcast sound signals. It also
decodes stereo TV sound from local cable companies
as long as they operate on assigned cable frequen-
cies and use the EIA-recommended MTS stereo/bilin-
gual TV sound system.
Multichannel TV Sound Indicator (MTS)
When you press ENTER/OK one or both of the indi-
cators appears on the TV Screen.
STEREO
The DVD+VCR can record in stereo onto the VHS
Hi-Fi audio tracks when the BROADCAST TYPE
option is in the STEREO position. The DVD+VCR
can also record mono audio onto the mono audio
track.
SAP
Some stations transmit a Second Audio Program,
which is used for a second language or additional
information.
STEREO/SAP
Use the BROADCAST TYPE option to select the
desired recording mode (STEREO or SAP).
Summary of Contents for XBV613 - DVD/VCR Combination
Page 37: ...37...
